Electronics Forum | Thu Apr 28 08:04:45 EDT 2005 | stepheniii
I like Mydata, Fuji, and Panasonic equipment. However if you have one, I"m not a fan of mixing. I have worked with the IP3 with MTU. I found it a good solid machine. The only thing at that time was the programing. I believe they have changed thi
Electronics Forum | Mon Aug 29 13:34:58 EDT 2016 | mhanrahan
We had this issue with our old MV 150. This was usually due to clogged/dirty or bent nozzles, or clogged dirty filters on the vacuum supply to the head.
Electronics Forum | Sun Mar 12 11:10:51 EDT 2023 | compit
I don't know how in Panasonic - in Yamaha and similar pressure / vacuum is calibrated for each head and nozzle - maybe you need to calibrate?
Electronics Forum | Wed Mar 20 15:01:37 EDT 2024 | linux
Reboot usually does the trick, Reason for these fault, (1) Nozzle holder, the grippers are holding the nozzle too tight, stretch the spring slightly, (2) shaft is sticking, removed the head lubricate the shaft.(3) Nest not opening and closed within t
Electronics Forum | Thu Mar 21 15:27:16 EDT 2024 | linux
Z Axis, I'm assuming the overload error occurs when the head is picking up the nozzles,
Electronics Forum | Fri Apr 27 13:41:19 EDT 2001 | 061032
The "band wagon" was a corporate decision. The performance issue concerned a communications problem between the line computer and the F5 (f5 locked up in the middle of a PCB). This issue did not show it's ugly head until a month after install. I t
Electronics Forum | Thu Sep 27 16:21:03 EDT 2007 | adlsmt
We have two, about 2.5 years old and 1.5 years old. We run all kinds of parts and get about 18K to 20K CPH. The pick accuracy is fantastic so have saved a lot of $$$$ by not having dump buckets full of parts at the end of runs. I could not be happier
Electronics Forum | Sat Jan 14 13:18:37 EST 2006 | mrduckmann2000
Let's think about this, there former filed service engineers. I bet they got out of field becasue of being laid-off. Typically the NON-Performers are the first to go. Hint hint.....former field engineers! Quad 4C's when they were new to the marke
Electronics Forum | Sun Sep 12 07:25:26 EDT 1999 | Eyal Dickerman
| | To all SiPlace Users, | | | | I know there are lots of you out there! From your own experiences, what sort of life expectancy would you expect (in terms of number of placements) from a rotary star head for a Siplace 80S15 or 80S20 machine, befor
Electronics Forum | Wed Jan 28 08:11:20 EST 2004 | stefwitt
Martin, may I ask what your offer is? Does the pick and place machine vendor provide you with a special nozzle, which would not require the peel off cover. Custom nozzles from the OEM are quite expensive, because they implement engineering and test.
